Corega CG-WLBARGO Spécifications télécharger pdf (Page 26)

Plug & Play Wireless Day and Night NetworkCamera

3.8. Night Mode Control

The IP Cam can function in both daylight and the dark of night. The infrared LEDs

on the IP CAM can provide IR illumination for objects up to 10 meters distant. This

night mode control page is used to control when the IR LEDs will be on. There are

three ways to control the night mode (IR LEDs):

1. Automatic day and night mode switch: the IP cam will automatically turn on the

IR LEDs when the lighting conditions are too low for natural light imaging. The

light sensor on the IP cam allows it to detect the light levels.

2. Scheduled time of night mode: the IP Cam can also be scheduled to turn on

the IR LEDs during a specific time range each day.

3. Manual night mode control: the IP Cam can be manually forced into night

mode (IR LEDs on) or day mode (IR LEDs off).

In order to get better video color display during both daylight and darkness, there

is an ICR (IR Cutter Remover) inside the IP Cam. This ICR automatically to filters out

any IR (Infrared) light during the daylight conditions and allows the IR light to pass

through during the hours of darkness. This ensures that the video color quality is

excellent, especially when compared to other IP cameras.

Figure 3-13: Night mode control page.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 50 51

Pas de commentaire

Corega CG-WLBARGO Spécifications Page 26