Corega CG-WLBARGO Manuel d'utilisateur télécharger pdf (Page 24)

E-Guard IC502w

3.5. Advanced Network

In some special situation, your network environment only provides PPPoE

connection(ADSL service), there is no NAT/router available. You will then need to set

the PPPoE settings in the “Advanced Network” page. Only the PPPoE username and

password are needed to let PPPoE work. After the “Save&Apply” button is pressed,

the PPPoE function will work immediately. You can check the “Registration status” in

the “Information” page to see if the IP CAM is registered using the PPPoE connection.

Please be noticed that the DHCP or static IP settings in the “Network” page can

work together with the PPPoE connection. Only that the PPPoE has higher priority, so,

if the PPPoE is working, the IP CAM will use PPPoE to connect to the Internet.

The default setting is “Disable PPPoE”.

Figure 3-10: Advanced network settings page

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 38 39

Pas de commentaire

Corega CG-WLBARGO Manuel d'utilisateur Page 24