Corega CG-WLBARGO Manuel d'utilisateur télécharger pdf (Page 30)

E-Guard IC502w

3.9. SD-card record control

The IP camera has a micro-SD card slot that users could insert micro-SD card

into the IP camera for video recording usage. The maximum size supported for the

micro-SD card is 2G bytes. In the “Record Control” page, users could control the

recording method for the micro-SD card :

1. Disable/motion trigger/Schedule recording – choose to disable the recording,

trigger the recording by motion detection or doing the scheduled recording.

2. When SD card full – choose to stop the recording or doing cyclic recording when

the micro-SD card storage is running out of space (storage full).

3. Motion trigger – when motion trigger is chosen, need to choose the “Detection

sensitivity”, the micro-SD card will start to record at least 30 seconds when a

motion in the video is detected.

4. Schedule recording – when schedule recording is chosen, can do either periodic

scheduled recording or fixed time recording.

A. Periodic scheduled recording – will do the video recording into micro-SD

card periodically every week during the selected week days and time

duration.

B. Fixed time recording – will do a continuous recording into micro-SD card

during the specified time duration.

Figure 3-14: Micro-SD card recording control page

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 38 39

Pas de commentaire

Corega CG-WLBARGO Manuel d'utilisateur Page 30